6560-852, Sundance, Jacuzzi Spas Flow Switch

<< Previous in Harwil Flow Switches

Next in Harwil Flow Switches >>

List Price: $69.03

Your Price: $ 48.32 FREE Shipping! Low price Guaranteed!*

FREE Shipping on this item!

Item Number: 6560-852

Manufacturer: Sundance® Spas

Manufacturer Part No: 6560-852

Quantity:

Flow Switch with white PVC Tee (Sundance ships it with the T fitting)Fits:
Does not come with cables. 3/4 inch slip x slip T with 1/2inch threaded reducer for 1/2 inch threaded flow switch
Used on these Sundance Models:
All Sundance 800/850Models, using the 6500-301 Bypass Heater: up to 5/99
2007 Metro and Solo
2006 Caprio, Metro and Solo
2005 850E and 780 Lagunas Models
All 2000-2004 Portofino Models, Tango

Used on these Jacuzzi Models:

2004+ J-315

2004 J-325

2002-2003 J-310
A defective flow switch will cause a "Flashing Flo" or even a "Solid Flo" on the Control Panel Icon. "Solid Flo" is the Flo Switch, a "Flashing Flo" could be: Flo Switch, Circulation Pump(clogged or defective), Dirty Filter.
The connectors on the Flow Switch are attached to a pc board connector that is located on the PC Board (usually at the top). There are other wires connected to this plug: Jumper interlock wire,Flow Switch, High Limit and Temp sensor. Remove the pin connector from the board . To remove a sensor or switch wire from the sensor harness connector, insert a paper clip into the slot corresponding with the wire to be removed. This will depress the pin tine, allowing the wire to be pulled from the harness connector. Important! When reinstalling the sensor or switch wire back into the sensor harness connector, make sure the pin tine is lifted (approx. 1/32") prior to inserting the wire. This will insure the sensor wire locks into the harness connector. Do not over bend the pin tine or it may break off. *FREE Shipping with a $4.95 Handling Fee.Please see front page for details on our Low Price Guarantee!

Additional Information

For All Sundance Flow, Pressure Switches, Click Here!